MAC TW1 FIXTURE COMPLETE

The MAC TW1 is a powerful, silent tungsten wash light with a clean, even, soft-edged beam, a motorized zoom, exceptional and rich CMY color mixing and can be run from the built-in dimmer or from an external dimmer.

FEATURES

• Total output up to 14200 lumens
• CMY color mixing system
• Rapid stobe effects (up to 10 Hz)
• Motorized zoom
• Fresnel (included), narrow, and multi array
• Internal & external electronic dimming plus mechanical dimming
• 80 V dimmer for universal operating voltage
• Patented very low-noise cooling
• Various front accessories for theatre, television and film applications

SPECIFICATIONS
PHYSICAL

• Length: 454 mm
• Width: 362 mm
• Height: 709 mm, head straight up
• Weight: 26.8 kg, IGBT dimmer model
• Weight: 27.4 kg, 80 V dimmer model

DYNAMIC EFFECTS

• Color mixing: CMY, independently variable 0 - 100%
• Electronic dimming: Multi-voltage IGBT and 80 V internal dimmer options, 'plug and play' external dimming
• Mechanical dimmer: 0 - 100%
• Shutter: Strobe effect up to 10 Hz, random strobe
• Zoom: Narrow 14.5° - 27°, Standard 20° - 41°, Very wide 97° - 105°, 1/10 peak angles, 80 V lamp
• Pan: 540°
• Tilt: 242°

CONTROL AND PROGRAMMING

• DMX channels: 14/20
• Setting and addressing: Control panel with display
• 16-bit control: CMY, mechanical dimmer, electronic dimmer, zoom, pan & tilt
• Movement control options: Tracking and vector
• Dimming curve options: Various available
• Protocol: USITT DMX512-A
• Receiver: Opto-isolated RS-485
• Firmware update: Serial upload via DMX link

LAMP

• Type: 1200 W tungsten halogen
• Approved lamps: Philips 1200/115, 1200/230 or 1200/240 FastFit, OSRAM Lok-It 1200W 80V/32/P50
• Socket: PGJX-50
• Lamp voltage must match internal or external dimmer output voltage:

DIMMING SYSTEM OPTIONS

• Internal multi-voltage IGBT dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
• Internal 80 V dimmer: 0 - 100%, 8- or 16-bit dimming resolution, controlled via DMX
• External dimmer input: Intelligent lamp power control

CONSTRUCTION

• Color(s): Black
• Housing: Magnesium alloy, UV-resistant fiber-reinforced composite
• Reflector: Glass, cold light
• Protection rating: IP20

INSTALLATION

• Orientation: Any
• Mounting points: 2 pairs of 1/4-turn locks

CONNECTIONS

• AC power input: 3 m integral cable without power plug
• DMX data in/out: 3-pin and 5-pin locking XLR
• External dimmer: Neutrik PowerCon

ELECTRICAL

• AC power: 100-120/200-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Main fuse: 20 AT (slow blow)
• TYPICAL POWER AND CURRENT
• 115 V, 60 Hz: 1226 W, 10.7 A, PF 0.998
• 230 V, 50 Hz: 1220 W, 5.3 A, PF 0.995
• 240 V, 50 Hz: 1233 W, 5.2 A, PF 0.996
• 230 V, 50 Hz using internal 80 V dimmer: 1219 W, 5.5 A, PF 0.970
• 230 V, 50 Hz using external dimmer, figures for fixture only: 93 W, 1.0 A, PF 0.420
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:

THERMAL

• Lamp cooling: Patent-pending low noise ducted forced air system
• Cooling: Filtered forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C
• Minimum ambient temperature (Ta min.): 0° C
• Maximum surface temperature, steady state, at 40° C ambient: 200° C (392° F)
• Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 4180 / 4160 BTU/hr.

ACOUSTIC

• Sound power level: 31 dBA (steady state, lamp on, effects static, Ta=20°C, test conditions ISO 3743-2:1994)

APPROVALS

• EU safety: EN 60598-2-17, EN 61347-1
• EU EMC: EN 55 015, EN 55 103-1, EN 55103-2
• US safety: ANSI/UL 1573